/Problem with startup EventId 29 and EventId 41 and eventid 219 (via WindowsKernel.com)
Black Screen and System Restart with Even ID 41 : BugCheckCode 278

Problem with startup EventId 29 and EventId 41 and eventid 219 (via WindowsKernel.com)

Hi Artur, I am Rob, an independent and a 14 time and dual award MVP specializing in Windows troubleshooting and Bluescreen analysis. Please remember as independents we are not responsible for the development of Windows or the computer hardware and drivers.
If you will work with me I will be here to help until the issue is resolved.

This will not be an easy one-click type fix :

It is almost a certainty that there is a hardware issue, or more than one, with the computer. And there are some problems related to the network device (not likely the sole cause) and/or its driver.

For the network device please check with the System/Motherboard and/or actual network device maker for updated drivers,

If needed try this if needed : (though definitely check the above first)

Right Click the Start Button – Device Manager – expand Network adapters – Double Click the device – Driver’s tab – Update driver


The most serious issue is the Event ID : 41

ID41 with no Bug_Check – The main cause of this issue as you have described is hardware related :


1. Over-Clocking -> best to reset ALL to the defaults especially while troubleshooting

2. Memory (check thoroughly as indicated below).

3. Power Supply (see below to ensure you have enough power).

4. Over-heating – even if the overall temps are with-in specs a single component can be too sensitive to even the normal levels of heat and fault at a lower temp. Try adding a fan blowing into the case to reduce the effects of heat even more than the cooler
usually does. Of course ensure all built-in fans are running.


After checking determining the wattage of the power supply you will then need to check the requirements of the motherboard and devices. Usually, the video card is one of the major power users.

How do I determine how big my power supply is?

Other good sources of information are the device makers’ sites and their forums.

eXtreme Power Supply Calculator

Power Supply Calculator

Choosing the right power supply for your computer

How Do I Test the Power Supply in My Computer?


Memory tests do not catch all errors such as mismatched memory (possible even for sticks that appear to be identical) and when faster memory is placed in system behind slower memory. So it is best to also swap sticks in and out to check for those even if all
memory tests fail to show a problem.

To test RAM check here – let it run 4+ hours or so. <-- best method

MemTestX86 – Test RAM With

For the Windows Memory Diagnostic Tool.

Type in Cortana’s search box -> Windows Memory Diagnostics
at top of list – click it. in Windows 8/8.1/10 the name is “Windows Memory


If there are or have been any DMP files created please upload those for analysis.

Troubleshoot blue screen errors <-- read this link

We can analyze the minidumps if you make them available from the OneDrive or other file sharing sites (such as MediaFire). If you have problems uploading the minidumps copy them to the Desktop or the Documents folder and upload them from there.

One-Drive – Share files and folders and change permissions

Upload photos and files

Zip or upload the contents of C:Windowsminidump

Use OneDrive to upload collected files

Here to help,


Standard Disclaimer: Those may be non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research
any product advertised on the site before you decide to download and install it.

Please let us know the results and if you need further assistance. Feedback definitely helps us help all.

This is a syndicated post. Read the original post at Source link .